Quick Answer

This is a replacement and ordering reference for the Adams Rite 91-series trim components and 2101-series strikes stocked at Security Parts. It covers part number decoding, finish codes, model compatibility, and handedness. If you need guidance on which Adams Rite product to specify for a new installation, see the retail storefront door hardware guide.

Key ordering rules for Adams Rite parts before you open the catalog:

• 91-0202-01 vs 91-0202-02: These are inside trim and outside trim kits. They are not interchangeable. Confirm which face of the door needs service before ordering.
• IP in the part number: Stands for Inside Pull. Not a generic designation. It describes the pull handle configuration specific to glass storefront inside trim.
• MV8 vs MV7 vs MW0 lever kits: MV8 is right-hand. MV7 is left-hand. MW0 is universal. Order MW0 if you cannot confirm hand orientation.
• 2190 vs 2290 faceplate kits: 91-0266-01 fits the 2190. 91-0266-04 fits the 2290. Confirm the model number stamped on the lock body before ordering.
• 2101-01 vs 2101-02 strikes: 2101-01 is flat-corner. 2101-02 is radius-corner. The frame cutout profile determines which is correct.
• Finish codes: US32D (satin chrome), 10B (oil rubbed bronze), 628 (satin aluminum), 313 (dark bronze). Must match the existing hardware finish.

Security Parts stocks 55 Adams Rite parts across trim kits, cover kits, designer lever kits, faceplate kits, and strikes. Call 845-935-0301 for pre-order compatibility support.

How the Adams Rite 91-Series Part Numbers Work

The 91-XXXX numbering system is not self-explanatory. Understanding it before placing any order prevents the most common wrong-part returns in Adams Rite service.

The number after the hyphen identifies the component family. The suffix after the second hyphen identifies either the finish, the hand orientation, or the model compatibility. Here is the breakdown of every family in the current Security Parts catalog:

Trim Hardware Kits: 91-0202-01 and 91-0202-02

Adams Rite 91-0202-01-IP Inside Trim Hardware Kit. View product page and order.

The 91-0202 trim hardware kits supply the complete mounting and trim hardware for the 2190 deadlatch body. Two kits are stocked and serve different sides of the door.

• 91-0202-01-IP: Inside trim hardware kit for the 2190. Covers all hardware components for the interior (egress) face of the door. The IP designation indicates Inside Pull configuration. Order this when servicing the interior trim of the installed 2190 deadlatch.
• 91-0202-02-IP: Outside trim hardware kit for the 2190. Covers all hardware components for the exterior (entry) face of the door. Order this when servicing the exterior trim of the installed 2190.

Ordering 91-0202-02 when 91-0202-01 is needed (or vice versa) is the most common wrong-part return for Adams Rite 2190 trim service. Confirm which face of the door requires the replacement before placing the order.

Outside Trim Cover Kits: 91-0200 Series

Adams Rite 91-0200-US32D-IP Outside Trim Cover Kit. View product page and order.

The 91-0200 outside trim cover kits supply the cover plate assembly for the exterior face of the 2190 deadlatch. The cover kit protects the trim mechanism housing and provides the finished appearance on the exterior side. Two finishes are stocked:

• 91-0200-US32D-IP: Outside trim cover kit, satin chrome finish (US32D).
• 91-0200-10B-IP: Outside trim cover kit, oil rubbed bronze finish (10B).

The corresponding inside trim cover kit is the 91-0201-US32D (satin chrome), available for the interior face.

Designer Lever Kits: 91-0197 Series

Adams Rite 91-0197-MW0-US32D-IP Designer Lever Kit (Universal). View product page and order.

The 91-0197 designer lever kits supply a lever-style handle for the Adams Rite 2190 trim. The lever mounts to the inside face of the door. Three hand-orientation codes are stocked, each available in two finishes, for a total of six configurations.

Hand Orientation: MW0, MV8, MV7

Hand orientation is determined by the hinge position when you stand on the outside (entry side) of the door and face it. If the hinges are on your right, the door is right-hand. If on your left, it is left-hand.

• MW0: Universal hand. Fits both right-hand and left-hand doors. Order MW0 when you cannot confirm the door hand or when stocking a single part for multiple installations.
• MV8: Right-hand only.
• MV7: Left-hand only.

91-0197 Lever Kits by Finish

Faceplate Kits: 91-0266 Series (2190 vs 2290)

Adams Rite 91-0266-01-628-IP Faceplate Kit (2190). View product page and order.

The 91-0266 faceplate kits replace the edge plate on the Adams Rite lock body. The faceplate covers the latch bolt opening at the door edge and carries the lock body cutout geometry. Model compatibility is the critical variable: 2190 and 2290 lock bodies use different faceplate dimensions.

Check the model number stamped directly on the edge of the lock body before ordering. On an installed Adams Rite, the model number is readable with a flashlight at the door edge when the door is slightly open.

• 91-0266-01-628-IP: Faceplate kit for the 2190, finish 628 (satin aluminum).
• 91-0266-01-313-IP: Faceplate kit for the 2190, finish 313 (dark bronze).
• 91-0266-04-628-IP: Faceplate kit for the 2290, finish 628 (satin aluminum).
• 91-0266-04-313-IP: Faceplate kit for the 2290, finish 313 (dark bronze).

Adams Rite 2101 Strikes: Flat vs Radius

Adams Rite 2101-02-630 Radius Strike with Dust Box. View product page and order.

The 2101 series strikes mount in the door frame and receive the Adams Rite 2190 deadlatch bolt when the door closes. All 2101 strikes include a dust box, which is a small flip-spring cover that closes over the strike pocket when the door is open and prevents debris from accumulating in the bolt engagement area.

2101-01: Standard Flat Strike

The flat strike has square corners on the face plate. The correct choice when the frame cutout has square corners.

• 2101-01-630: Flat strike with dust box, finish 630 (satin stainless steel).
• 2101-01-121: Flat strike with dust box, finish 121 (dull bronze).

2101-02: Radius Strike

The radius strike has rounded corners on the face plate. The correct choice when the frame cutout has radius (rounded) corners, which is common on most extruded aluminum door frames.

• 2101-02-630: Radius strike with dust box, finish 630 (satin stainless steel).
• 2101-02-121: Radius strike with dust box, finish 121 (dull bronze).

If you cannot confirm the frame cutout profile, the radius strike (2101-02) is the more common choice for aluminum extruded door frames. For guidance on strike compatibility with other commercial locks, see the strike plates, deadlatches, and latch bolt parts guide.

Finish Code Reference

Adams Rite finish codes follow standard ANSI/BHMA A156.18 designations. Ordering the wrong finish is a common mistake when service calls happen under time pressure. This table covers every finish code in the current Security Parts Adams Rite catalog:

Quick Ordering Reference: All Adams Rite Parts in Stock

How to Identify Which Adams Rite Part You Need Before Ordering

Service calls on Adams Rite installations follow a consistent pattern. The lock body is installed in the door edge, the trim hardware is on the door faces, and the strike is in the frame. When something fails, the first step is identifying which component is at fault before pulling part numbers.

If the Latch Does Not Spring Back Correctly

This is a trim hardware or lock body issue, not a strike issue. The trim hardware kits (91-0202-01 and 91-0202-02) contain the springs and mechanical linkages that operate the inside and outside trim. If the inside thumb turn or outside pull does not return smoothly, the trim hardware kit for that face of the door is the starting point. Confirm which face is affected and order the corresponding kit.

If the Door Does Not Latch When Closed

Start at the strike (2101-01 or 2101-02) before touching the lock body. A strike that has shifted position in the frame, has a damaged dust box blocking the bolt pocket, or has a worn keeper can prevent the latch bolt from seating. Remove the strike, clear the pocket, and confirm proper alignment before ordering a replacement lock body component.

If the Lever or Handle Is Physically Damaged

The designer lever kit (91-0197 series) or trim cover kit (91-0200 or 91-0201 series) handles the visible hardware on each face of the door. These components are replaceable without disturbing the lock body. Confirm the finish (US32D or 10B) and the door hand (MV8 right, MV7 left, MW0 universal) before ordering. When in doubt about hand orientation, order MW0.

If the Faceplate at the Door Edge Is Damaged

The faceplate kit (91-0266 series) covers the plate at the door edge that frames the latch bolt cutout. It is frequently damaged when a door is forced or when pry-in access is attempted on the frame. Confirm the lock body model (2190 or 2290) by reading the stamp on the existing faceplate or lock body casting before ordering. The 2190 and 2290 faceplate kits are not interchangeable.

The Four Questions to Answer Before Placing Any Adams Rite Parts Order

1. Which face of the door? Inside (egress) or outside (entry) determines 91-0202-01 vs 91-0202-02 and cover kit selection.
2. Which lock body model? 2190 or 2290 determines the faceplate kit (91-0266-01 vs 91-0266-04).
3. What finish? US32D, 10B, 628, 313, 630, or 121 must match existing hardware.
4. What hand (for lever kits)? Right-hand (MV8), left-hand (MV7), or universal (MW0).

If you cannot confirm any of these before ordering, call 845-935-0301. Providing the door address and installation date allows the Security Parts team to cross-reference what was typically installed and narrow down the correct part number before anything ships.

Source Adams Rite Parts at Security Parts

Security Parts stocks 55 Adams Rite parts across trim hardware kits, outside and inside trim cover kits, designer lever kits, faceplate kits, and 2101 strikes. Same-day shipping on stocked components. Call 845-935-0301 for pre-order compatibility support.

The most common field service scenario for Adams Rite 2190 trim parts involves a damaged or worn trim kit component on an aluminum storefront glass door that has been in service for several years. Before calling to order, have the following information ready: the model number from the lock body edge (2190 or 2290), the finish code from the existing hardware, and which face of the door needs service (inside or outside). With those three pieces of information confirmed, the correct part can be identified from this guide and shipped same day.

For complete replacement and repair guidance on commercial door hardware, see the commercial door hardware replacement and repair guide. For scheduled maintenance and inspection guidance relevant to commercial door lock hardware under NFPA 80, see the commercial door hardware maintenance checklist.

For Adams Rite product selection guidance, installation context, and aluminum storefront hardware scheduling, see the retail storefront door hardware guide.

For electric strike compatibility with Adams Rite deadlatches, see the electric strikes guide and how to install an electric strike. For access control integration, see the access control and commercial door hardware integration guide.

For OEM versus aftermarket parts guidance, see the OEM vs aftermarket commercial door hardware guide. For ANSI/BHMA finish and hardware standards, see the ANSI/BHMA door hardware standards guide.

About the Author

This guide was written by the Security Parts team, a commercial door hardware specialist serving locksmiths, facilities managers, general contractors, and access control integrators since 2001. Security Parts stocks the complete Adams Rite 91-series trim catalog and 2101-series strikes with same-day shipping on stocked components and pre-order compatibility support at 845-935-0301.