Picture of Schlage Commercial Hardware Parts

SKU: 46928826

Schlage Commercial Hardware Parts 46928826 Standard Mortise Lock Retractor

Schlage 46928826 standard mortise lock retractor

Schlage Commercial Hardware Parts

SKU: 46928826

Schlage Commercial Hardware Parts 46928826 Standard Mortise Lock Retractor

Available (3 - 4 Weeks)

The Schlage 46928826 is a standard mortise lock retractor for 1-1/4-inch mortise cases used with door thicknesses from 1-3/4 inches to 2-3/4 inches.

The Schlage 46928826 Standard Mortise Lock Retractor is a replacement component for 1-1/4-inch standard mortise lock cases installed on doors ranging from 1-3/4 inches to 2-3/4 inches thick. The retractor is used within the mortise lock case as part of the lock’s mechanical operating assembly. It is intended for servicing compatible Schlage commercial electronic lock configurations that use the specified standard mortise case.

We are your trusted source for commercial door hardware, security hardware, electronic access control products, and OEM replacement parts.

Manufacturer: Schlage
Part Number: 46928826
Product Type: Standard Mortise Lock Retractor
Product Series: CO Series / AD Series
Primary Function: Lock retraction component
Application: Commercial electronic lock service and replacement
Door Thickness: 1-3/4" to 2-3/4"
OEM Part: Yes

Compatibility

  • CO-100-MS Keypad Only, Exterior
  • CO-200-MS Keypad Only, Exterior
  • CO-200/250-MS All Models Except Keypad Only, Exterior
  • AD-200/250-MS, Exterior
  • AD-300-MS, Exterior
  • AD-400-MS, Exterior
$725.00
$652.50
minus minus

Catalogs

Frequently Asked Questions

What is the Schlage 46928826 used for?
The Schlage 46928826 is a retractor component used with a 1-1/4-inch standard mortise lock case.
What door thicknesses are supported by the Schlage 46928826?
It is designed for door thicknesses ranging from 1-3/4 inches to 2-3/4 inches.
What size mortise case is the Schlage 46928826 used with?
The Schlage 46928826 is used with a 1-1/4-inch standard mortise case.
Can the Schlage 46928826 be used on doors thicker than 2-3/4 inches?
No. The specified door thickness range is 1-3/4 inches to 2-3/4 inches.
Is this an OEM Schlage replacement part?
Yes. It is a genuine Schlage OEM replacement part.

Shop the Schlage 46928826 standard mortise lock retractor for 1-1/4" mortise cases on doors 1-3/4" to 2-3/4" thick. Find the correct replacement part.

Shop the Schlage 46928826 standard mortise lock retractor for 1-1/4" mortise cases on doors 1-3/4" to 2-3/4" thick. Find the correct replacement part.

Shop the Schlage 46928826 standard mortise lock retractor for 1-1/4" mortise cases on doors 1-3/4" to 2-3/4" thick. Find the correct replacement part.